🥼 Before you begin
If you do not have a OneLab account, please create one by going to:
https://onelab.andrewalliance.com/signup
1 - Plug your Pipette+ stand to a power source
The LED sign will turn white and blink, which means that the stand is booting.

⚠️ Only use the provided AC/DC power supply unit and cords.
2 - Wait the LED sign to turn blue and blink
In about a minute, the Pipette+ stand will inform you when it's in installation mode.

❕ If the stand doesn’t enter automatically in installation mode, press 5 times the push button located next to the LED sign.
3 - Connect your computer, tablet or smartphone to the Pipette+ Stand

A. Go to your Wi-Fi settings and select the network named Stand-618.xxxx.xxxxx
618.xxxx.xxxxx is the connected device serial number (you can find it in the back of your device).
B. The LED sign will stop blinking when it’s successfully connected.
4 - Launch a web browser, type http://192.168.2.1 and follow the on-screen steps to continue installation

❕ Please note that the installation page might open automatically.