Design protocol with OneLab

This collection contains several sections with articles about how to design protocols in OneLab

Guillaume Mignard avatar Alexandre Rodriguez avatar Nikolas Vamvoukas avatar +1
55 articles in this collection
Written by Guillaume Mignard, Alexandre Rodriguez, Nikolas Vamvoukas and 1 other
Protocol designer

Protocol action: Flow-through extraction

This article shows how to create an extraction step in your protocol to process your samples using the action "Flow-through extraction"
Alexandre Rodriguez avatar
Written by Alexandre Rodriguez
Updated this week

Protocol action: Discard solution

This article describes how to add to your protocol a step for emptying a labware
Alexandre Rodriguez avatar
Written by Alexandre Rodriguez
Updated over a week ago

How to upgrade the legacy vacuum/positive pressure action

This article describes how to upgrade a legacy action to its newest version
Alexandre Rodriguez avatar
Written by Alexandre Rodriguez
Updated over a week ago

How to change general protocol parameters ("Edit protocol")

This article describes how to change the general protocol parameters.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated yesterday

What is the OneLab protocol designer?

This article gives information about the OneLab protocol designer.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Designing a new protocol

This article describes how to design a new protocol.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Saving your protocols online and/or locally

This article describes how to save your protocols.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Opening and working on an existing online protocol

This article describes how to open an existing protocol and edit it.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Importing your protocols from local copies

This article describes how your protocols can be imported when you obtain a .onp file
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago
Pipetting actions / Protocol steps

Single pipetting action

This article describes how to add a single pipetting step to your protocol.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Concentration normalization

This article describes how to add a concentration normalization step to your protocol.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Serial dilution

This article describes how to add a serial dilution step to your protocol.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Serial dilution examples

This article has 3 examples of creating serial dilutions in Onelab
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Centrifugation

This article describes how to add a step to your protocol where a centrifugal motion is generated in your sample.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Apply magnetic field

This article describes how to add a step to your protocol where a magnetic field is applied to your sample.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Protocol action: Apply vacuum/positive pressure

This article describes how to add a step to your protocol where a vacuum/positive pressure is applied to your sample.
Luis Miguel avatar
Written by Luis Miguel
Updated over a week ago

Vortexing

This article describes how to add a step to your protocol where a vortex is generated in your sample.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Shaking

This article describes how to add a step to your protocol where your sample is shaken.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Heat/Cool

This article describes how to add a step to your protocol where your sample is heated or cooled.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Timer

This article describes how to add an incubation timer step to your protocol.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

User action / notification

This article describes how to add a user action or notification to your protocol.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago
Pipetting menu parameters

Pipetting menu

This article presents the options available while designing a pipetting action.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Configuration: Multi-volume mode

This article describes how to add a multi-volume pipetting step to your protocol.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Advanced: Pipetting

This article describes the pipetting options present in the Advanced section of the Pipetting menu.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Advanced: Handling liquid viscosity

This article describes the options present in the Advanced section of the Pipetting menu for handling liquids with different viscosity.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Advanced: Tip position

This article describes the tip positioning options present in the Advanced section of the Pipetting menu.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Advanced: Tip choice

This article describes the tip choice options present in the Advanced section of the Pipetting menu.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Advanced: Mixing

This article describes the mixing options present in the Advanced section of the Pipetting menu.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Automation: Custom tip position

This article describes the customization option of the tip position present in the Automation section of the Pipetting menu.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Automation: Tip geometry control

This article describes the control of the tip geometry option present in the Automation section of the Pipetting menu.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago

Guidelines

This article describes the guideline field present in the Guidelines section of the Pipetting menu.
Nikolas Vamvoukas avatar
Written by Nikolas Vamvoukas
Updated over a week ago